Hardware Interface; Connections And Buttons; Front Panel - Kindermann Klick & Show Installation And User Manual

2. Hardware Interface

2.1 Connections and Buttons

Overview

Front panel


Rear Panel

Sensor-button TOUCH

2.1.1 Front Panel
ID
1 Front USB connector
STANDBY-LED
2
3 POWER button with LED indicator
USB port
To be able to use a Sensor-button it should be paired to the Base-unit you are using. Insert the sensor
button to an USB port of the Base-unit you are using. If necessary, the Firmware of the button is automatically
updating. Follow the instructions at screen.
Other functions of USB-port.
The USB port is used to update the software of Klick & Show.

The USB port is used for connecting a mouse to:

- Navigate in the SETTING configuration
- Control a PC desktop that is mirroring to the screen by using the Sensor-button TOUCH
Name
USB port, for Klick & Show TOUCH pairing, mouse
control, USB touch screen etc.
STANDBY-mode: green LED flashing
Unit ON/OFF with green status-LED ON/OFF
Description
9