Video Connection; Audio Connection - Kindermann Klick & Show Installation And User Manual

Note:
Once the Base-unit is powered, it starts up (booting). From now on please use the POWER button with Status LED
on front of Base-unit to switch on or off.
Power over Ethernet
If the LAN Ethernet switcher support PoE (Power over Ethernet), it could power up the Base-unit instead of using
the external power adapter.
3.4

Video connection

1. Connect the HDMI-Output of Base-unit to a Full-HD-/4K display by a quality HDMI cable.
2. Switch the Base-unit ON.
3. After started, the system shows the Home screen.
3.5

Audio Connection

The WiFi of Sensor-button TOUCH transmits the audio output of the PC/Laptop, re-direct and send to the Base-
unit together with the video signal. The audio will be output at line levels from mini jack socket 3.5 mm
connector and via the HDMI output connectors simultaneously.
Audio via HDMI output
When your display/projector is connected via HDMI and it support audio together with video than a separate
21