Set Up Wi-Fi Hotspot - Kindermann Klick & Show Installation And User Manual

5.2.3 Set up Wi-Fi hotspot

Set-up Wi-Fi hotspot includes Network SSID, Security, Frequency, Channel, Password, and Show Password.
Network SSID: Click in the input filed to fill out or change to the appropriate SSID.

Security: Select different security protocol, including WPA PSK, WPA2 PSK. WPA2 PSK is recommended.

Frequency: Click to select 2.4 GHz or 5 GHz WIFI frequency. Default is 5 GHz.

Channel: Click to select the Wi-Fi channel. Default is 40.

(2.4 GHz: channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11;
5 GHz: channels: 36, 40, 44, 48, 149, 153, 157, 161, 165),
Default is 5 GHz, Kanal 40.
Password: Click in the input filed to fill out the appropriate password with length of 8 characters.

Show Password: Check to show up the visual able password.

After finish, please click "Save" to save and return. Or, please click "Cancel".
Change Frequency: Click to select 2.4 GHz or 5 GHz.
Hinweis:
Klick & Show TOUCH supports 2.4 GHz- and 5 GHz-band. The 2.4 GHz-band has a higher range; the 5 GHz-band is
less sensitives to interferences. Please check the surroundings which frequencies and channels are used, for example
with a WiFi analyser, see chapter 5.2.5. Some mobile devices will only apply to one GHz band. Default is band 5
GHz, channel 40.
If the Wi-Fi channel is changed, no new coupling of the sensor buttons is necessary.
34