Table of Contents
Advertisement
7.1.2
When you are using Klick & Show for the first time on your MAC or for guests, you have to copy the Starter-
program "WirelessMedia" first on your Laptop / PC. Run this Starter-program.
When the Starter-program is pre-installed one time, Klick & Show is ready to use, with plug-in of Sensor-
button. Continue with Step 2.
1. When Starter-program „ WirelessMedia-macOS.app " is not yet been installed on PC, please proceed,
as is explained in chapter 4.3.
2. Plug a Sensor-button TOUCH to the USB port of your MAC. The Klick & Show application is starting
automatically and a symbol is displayed in the task bar of the PC/laptop
3. Until the Sensor-button shows a static green LED indicator, or until you see a message table showing up
at the right bottom corner of desktop "Ready to share", Klick & Show is ready.
A Klick & Show status icon is added to the MAC status bar at the right bottom corner
Right click it to open up the setting of Klick & Show, including:
a.
"Extended Desktop": check to transmit the extended desktop of PC/Laptop, or as default set, to
mirror the desktop of PC/Laptop.
b. "About": click to check the software version of Base-unit, Sensor-button TOUCH and Starter-
program.
„Options":
Extended desktop:
Keep aspect ratio:
HDMI-Eingang:
Remote Control Lock:
Remote View Lock:
4. Click the Sensor-button or the symbol at desktop of PC to start mirroring the desktop on the main
screen, LED is static red. An OSD message shows: logged in user name and whether REMOTE control of
desktop is locked/unlocked.
5. Click the Sensor-button again, to stop mirroring, LED shows green
Mac OS PC/Laptop
transfers extended desktop, when active
keep the original aspect ratio to display on the main screen
enables HDMI-Input at Base-unit
Remote Control with mouse of your meeting partner's PC is disabled
„Display ‚Main screen' on mobile device" is locked.
.
.
50
Advertisement
Table of Contents
