Hdmi Input Auto Switch; Background Image Home Screen; Volume; Security Setting - Kindermann Klick & Show Installation And User Manual

Wireless presentation solution

Hide thumbs Also See for Klick & Show:

Table of Contents

5.4.5 HDMI input AUTO switch

You can set, if HDMI-signal at HDMI-input of Base-unit is active, main screen is switched manually, automatically

or with changing of status of sensor button TOUCH the wired HDMI source is displayed.

User can select three options:

"Manual switching" of external HDMI input, see chapter 7.4.



"Last connect switch", switch to HDMI-IN, when Base-unit detects active HDMI signal, auto-switch to



Home screen, when HDMI signal at input is inactive.

"Switch to active HDMI input when Home screen is shown longer than 5 sec:" when sensor button is



active, the Home screen is shown for 5 sec., and then switched to external active HDMI-input. During the

5 sec. of Home screen, settings can be made in the Menu. When there is no active HDMI-IN signal,

Home screen is shown.

User can change background image of Home screen. Select the image (jpg, bmp, png with resolution 1920x1080

p.) from suitable directory and activate box for selection. You can return to Standard home screen every time.

User can select volume of display from 0 to 100.

5.5

Includes LAN discovery & connection, "Remote View" access, clear history, Admin password.

5.5.1 LAN discovery & Connection

Allow the PC/Mobile/tablet to discovery the Klick & Show unit in LAN and connect it, instead by WiFi.

For example, a guest may connect through the guest WLAN in a company. If Klick & Show is also integrated into

this guest network, the guest can also connect with Click & Show.

Table of Contents