Related Manuals for Kindermann 7488000300
Summary of Contents for Kindermann 7488000300
- Page 1 Wireless Presentation Solution Ref.-No. 7488000300, 7488000301 Installation and User Manual Release: Firmware 2.0.6 GB - 11.2017...
- Page 2 Overview Kindermann Klick & Show makes connecting or participate in a meeting by a most simple way, clicking a button. It also allows the other to join in the meeting more actively. The result is to make the meeting more efficient and productive.
-
Page 3: Table Of Contents
WARNING Please read the instructions carefully and store them The Kindermann Klick & Show K-10S can only be operated with a safety low voltage via the associated power supply unit The device must only be stored and used in a dry, closed environment without mechanical stress ... - Page 4 Video connection ..........................19 Audio Connection ..........................19 LAN connection ............................ 20 Usage of USB devices .......................... 22 Starting-up of Klick & Show ........................23 Mobile units: Wireless Connection ....................23 4.1.1 Enable portable hotspot: ......................23 4.1.2 Enable LAN Connection: ......................24 Pairing Sensor-button with Base-unit ....................
- Page 5 5.4.1 LAN discovery & Connection ..................... 38 5.4.2 Remote view lock ......................... 38 5.4.3 Clear History after meeting ......................38 5.4.4 Change admin password......................39 Language ............................... 39 System Update ............................. 39 Date & Time ............................39 About Device ............................39 System Firmware-Update..........................
-
Page 6: Overview
1. Overview Name Description Klick & Show Base-Unit Host / Base-unit with WiFi receiver Sensor-button with WiFi transmitter for PC/Laptop to share Sensor-button TOUCH the desktop/extended desktop APP for smart android devices to share the screen, transmit WirelessMedia for photos/music/video/files, exchange files, remote view and Android review mouse. -
Page 7: Hardware Interface
2. Hardware Interface Connections and Buttons Overview Front panel Rear Panel Sensor-button TOUCH 2.1.1 Front Panel Name Description USB port, for Klick & Show TOUCH pairing, mouse control, USB Front USB connector touch screen etc. POWER button and back-lit LED Unit ON/OFF with green status-LED ON/OFF/FLASHING indicator (STANDBY) -
Page 8: Rear Panel
Instead of a Mouse also a local connected touch Screen can be used Via this USB Port you can create a USB Stick containing the Starter-Program-Software for the Sensor-button TOUCH POWER button The button at the front of the Base-unit has a power on/off function once the Base-unit is powered. Pressing the Button switches the unit on and off (takes a few seconds each). - Page 9 Reset button On pressing the Reset button, a program restart is initiated at Base-unit. Start up the Base-unit. When the Home Page is shown up, press the reset button at the rear panel of Base-unit. Press this button with a pointed object, e.g.
- Page 10 Settings Airplay quality: High output Resolution: 1920x1080_60Hz, Background image: standard Volume: 100 Security setting LAN connection: Disable mobile devices can discover/connect the Base-unit in same LAN Presenter Lock: Disable remote view the main screen from mobile device application ...
-
Page 11: Sensor-Button Touch
2.1.3 Sensor-Button TOUCH The Klick & Show Sensor-button TOUCH is a dongle, which is used for extending or mirroring the desktop from a personal PC or MAC desktop to the Base-unit and the main screen in a meeting. Name Description - To connect to an USP-port of a PC/Laptop ( for sharing your screen) or USB connector... -
Page 12: User Interface
User Interface 2.2.1 Home Page Connect a mouse to either USB port to navigate in the menu. The default password for entering is “admin”. Name Description Service Set Identifier: WIFI name of the Base-unit hotspot SSID WIFI password of Base-unit PASS WiFI IP WIFI IP-address of Base-unit in wireless Lan... - Page 13 Steps to instruct how to transmit with Laptop / Mac, Windows /MacOS First-time-user must copy and execute one time the Quick Start Starter-program to Laptop / Mac Steps to instruct how to transmit smart mobile devices Android/IOS either powered by Android or IOS, onto the main screen. Quick Start First-time-user must download the APP from appropriate Store (scan OCR code)
- Page 14 Main menu settings User shall use the USB connected mouse or the Remote Mouse function in the APP for Android „WirelessMedia” Apk or “WirelessMedia for IOS” APP”. It is always recommended to have a USB-mouse connected to the Base- unit. If necessary, use a wireless mouse. It includes the sub-menu as below: Ethernet ...
- Page 15 Copy Starter-program at a USB-stick on Base-unit. Plug the Sensor-button TOUCH into your PC/Laptop via USB. Wait until LED indicator is static green. Touch Sensor-button to show your screen: LED is static red. Touch Sensor-button again, to stop transmission: LED is static green. Smart mobile devices quick-to-start steps Download APK/APP namely “WirelessMedia”...
-
Page 16: Installation Klick & Show
3. Installation Klick & Show Overview Installation methods for the Base-unit Table mounting Wall mounting Antenna placement and orientation Wiring Diagram Power Connection Video Connection Audio Connection LAN Connection USB Connection ... - Page 17 enough. Drive in 2 screws. Please leave at least a dimension 0.15mm space to place the bracket between the screw header and wall. Place the Base-unit on the wall, so that the holes on the bracket matches the 2 unfixed screws on the wall.. Hoop the bracket on the screw and slide the Base-unit downwards until it is fixed in the 2 screw on the wall.
-
Page 18: Wiring Diagram
Wiring diagram Power Connection Supplied is a universal power supply for mains 100 – 240 VAC, 12 VDC/2A with different, external power adapters. Adapter types Choose the appropriate power plug for your country (see www.iec.ch/worldplugs.) and slide it in power supply Connect the power adapter with the Base-unit. -
Page 19: Video Connection
Note: Once the Base-unit is powered, it starts up (booting). From now on please use the POWER button with Status LED on front of Base-unit to switch on or off. Video connection Connect the HDMI-Output of Base-unit to a 4K or HD display by a quality HDMI cable. Switch the Base-unit ON. -
Page 20: Lan Connection
Audio Output Connect the audio (mini Jack 3.5mm) of the Base-unit with the meeting room’s sound system by using a fitting cable. PC/Laptop Sound As default set, Klick & Show will mute the internal speaker of PC/Laptop and route the audio to the Base-unit, after PC/Laptop is successfully mirroring desktop to the main screen, in order to avoid the repeated audio. - Page 21 The LAN connection can be used for: network integration of Base-unit telnet control of the Base-unit maintenance purpose (in preparation) Information: The Base-unit can be controlled by Telnet-commands in some functions: “wifi on” turn on WIFI hotspot “wifi off”...
-
Page 22: Usage Of Usb Devices
Usage of USB devices Please use a USB Mouse or Touchscreen 1. for configuration of Klick & Show, 2. to control the sharing PC/Laptop („Remote-Control“ can be blocked also in settings), 3. for white board or annotation during a presentation, 4. -
Page 23: Starting-Up Of Klick & Show
4. Starting-up of Klick & Show Mobile units: Wireless Connection Download the application namely “WirelessMedia” (scan OCR-Code) in Android Play Store or Apple App Store. “WirelessMedia” provides two ways to discover the Klick & Show: 1. Tethering & portable hotspot, to connect the hotspot to the Klick & Show, 2. -
Page 24: Enable Lan Connection
4.1.2 Enable LAN Connection Be sure the Klick & Show is connected to the Network. When Local IP shows an active IP address, such for example like 192.168.3.1, it indicates the Base-unit is successfully connected to the LAN and get an appointed IP address. -
Page 25: Pairing Sensor-Button With Base-Unit
Pairing Sensor-button with Base-unit Connect the USB-connector of Sensor-button TOUCH to either of one USB port of Base-unit, to pair both units at same WLAN. Follow all OSD messages. A successful pairing is shown at OSD and static red LED. Then, please disconnect the Sensor-button TOUCH. -
Page 26: Mirroring Of The Desktop
Mirroring of the desktop 4.3.1 PC / Laptop When you are using Klick & Show for the first time on your laptop or for guests, you have to copy the Starter- program “WirelessMedia“ first on your Laptop / PC. Run this Starter-program. When the Starter-program is pre-installed one time, Klick &... - Page 27 Android 2. Click the right device to connect. Android 3. After complete the pairing, it shows OSD “Welcome ***” on the home page. For example it shows a “Welcome GT-I9300”, as shown below.
- Page 28 4. With Airplay technology, user can stream his screen wireless to Base-unit. For iOS devices, please swipe from bottom on desktop, to activate the control center. Click the Airplay icon on your Apply device and select the target „KlickandShow“ to start mirroring to the main screen.
-
Page 29: Menu "General Setting
5. Menu “General setting Connect a mouse to the Base-unit. Click the setting button on the top right corner , to open the configuration menu. The main interface of Setting is shown as below, including Ethernet, Tethering & portable hotspot, General setting, Language &... -
Page 30: Ethernet
Ethernet Includes IP address, Ethernet MAC address, Proxy & IP settings, PPPoE & Settings. 5.1.1 IP address The local IP address of Base-unit. 5.1.2 Ethernet MAC address Shows the static MAC address of the Base-unit. The MAC Address clearly designates the hardware of each individual network device. -
Page 31: Pppoe Settings
5.1.4 PPPoE settings Click to configure the PPPoE settings. PPPoE Setting: User name: Fill in the appropriate user name. Password: Fill in the right password for this user. Check box to choose “Save Account and Password” and “Show Password”. ... -
Page 32: Set Up Wi-Fi Hotspot
5.2.3 Set up Wi-Fi hotspot Set-up Wi-Fi hotspot includes Network SSID, Security, Frequency, Channel, Password, and Show Password. Network SSID: Click in the input filed to fill out or change to the appropriate SSID. Security: Click to select different security protocol, including WPA PSK, WPA2 PSK. WPA2 PSK is ... -
Page 33: Auto Change Wi-Fi Hotspot Password
5.2.4 Auto change Wi-Fi hotspot password Authentication with a password secures the connection of wireless LAN for authorized users only. To avoid that a participant of last meeting can view an actual meeting with the APP “Remote View” of WirelessMedia, the WiFi password will change on a certain configurable time, unless at least one button is connected to the Base-unit. -
Page 34: Wi-Fi Analyzer
5.2.5 Wi-Fi analyzer Various influences can lead to bad performance of the Klick & Show system. A careful frequency planning can avoid interferences with other electronic devices. A Wi-Fi analyzer is an embedded application tool in Klick & Show, to provide an advice for the deployment and Wi-Fi configuration. Klick &... - Page 35 Show systems are located closely to one another, more channels may be required. When Klick & Show Base-units, we recommend checking with the local IT department which channels are not used by the corporate WLAN infrastructure. In an ideal setup, overlapping channels should not be used for two Klick & Show Base-units within ...
- Page 36 The most favorable setup is a direct line of sight between Base-unit and buttons. Any obstruction will cause the signal to follow a longer propagation path, which can degrade performance. Due to the particular radio pattern of the dipole antennas used with Base-unit, the antennas should not ...
-
Page 37: General Settings
General settings Includes: automatic creation of Starter-program on an USB-stick, Standby, Airplay screen quality, HDMI output resolution, individual Home-Screen, volume at display. 5.3.1 Automatic creation of Starter-program Determines, when using a USB memory at one USB-port of Base-unit, the Starter-program will be copied automatically on USB memory. -
Page 38: Background Image Home Screen
5.3.5 Background image Home screen User can change background image of Home screen. Select the image (jpg, bmp, png with resolution 1920x1080 p.) from suitable directory and activate box for selection. You can return to Standard screen every time. 5.3.6 Volume User can select volume of display from 0 to 100. -
Page 39: Change Admin Password
5.4.4 Change admin password Change admin password for entering setting menu. Default password, or after a RESET, is “admin”. You can change the password, as you like or leave field blank, and deactivate the password request. Type to open on- screen keypad and enter signs. -
Page 40: System Firmware-Update
6. System Firmware-Update An update of the firmware can be useful to take the advantage of new features of Klick & Show or to fix known issues and bugs. There are three different areas for updating: Firmware Base-unit, Firmware Sensor-button TOUCH and Starter- program for PC/Laptop or MAC „WirelessMedia.exe“. -
Page 41: Upgrading Firmware Base-Unit
MAC OSX If the versions are not fitting together, that means: the updated firmware of Base-unit is not compatible to others, a new window appears: Upgrading Firmware Base-unit After the update of firmware of Base-unit, you have to make a RESET, where all data of configuration will be lost. So that you do not have to re-configure all data in a difficult process, note all settings within the Sub-menus. - Page 42 Connect the USB drive to either USB port of Base-unit. Note: each port can handle max. load of 500 mA. Connect a HDMI display to Base-unit, HDMI output port, connect a mouse, turn on by press the front panel power button. The display device shows the home page after normal boot of the device, as shown below: On the open-up menu, click the “System Update”...
- Page 43 After it, the unit displays the home page as shown below. After that, please do a Factory Reset at Base-unit When the Home Page is shown, press the reset button at the rear panel of Base-unit. Press this button with a pointed object, e.g.
-
Page 44: Upgrading Sensor-Button Touch
After reboot, the home page will appear again with the Home screen. 10. Please click the Setting button to open the menu, to check whether the correct FW version is upgraded. 11. The update of Base-unit is finished. Upgrading Sensor-button TOUCH Plug the to be updated Sensor-button TOUCH to either of the two USB port of Base-unit. -
Page 45: Software Update Of Starter-Program
After the upgrading is completed, it shows a “Upgrade OK!” as below Plug out the Sensor-button TOUCH.. Now, the upgrading progress is finished. Update all Sensor-buttons accordingly. Software update of Starter-Program After updating of Base-unit and Sensor-buttons may need to upgrade the Starter-program on PC / laptop also. Please check, if the Klick &... - Page 46 Choose and click Windows- or MAC Starter-program. Click the folder, where the “WirelessMedia” exe. program stores . Run the *.exe program. B. Download to an USB-stick at Base-unit Plug a USB-stick to USB port of Base-unit and copy Start-program „WirelessMedia.exe“ to USB-stick by clicking on symbol The Starter-program is written tot he USB-stick, a OSD-windows shows the progress.
-
Page 47: Clean Left Files Of Older Versions Of Starter-Program In Laptop
Clean left files of older versions of Starter-program in Laptop It may possible that there are some old version “WirelessMedia” files left in the laptop, which may influence the performance of the newer “WirelessMedia” program. Currently, it needs to manually clear them, before start to use the newly updated “WirelessMedia”... -
Page 48: Operation Guide For Klick & Show
7. Operation Guide for Klick & Show Transmitting PC desktop 7.1.1 Microsoft Windows PC / Laptop Operating system requirement: Windows XP/Vista/7/8/8.1/10 32 & 64 bit When you are using Klick & Show for the first time on your laptop or for guests, you have to copy the Starter- program “WirelessMedia“... - Page 49 „Options“: Extended desktop: transfers extended desktop, when active Keep aspect ratio: keep the original aspect ratio to display on the main screen HDMI-Eingang: enables HDMI-Input at Base-unit Remote Control Lock: Remote Control with mouse of your meeting partner’s PC is disabled Remote View Lock: „Display ‚Main screen‘...
-
Page 50: Mac Os Pc/Laptop
7.1.2 Mac OS PC/Laptop When you are using Klick & Show for the first time on your MAC or for guests, you have to copy the Starter- program “WirelessMedia“ first on your Laptop / PC. Run this Starter-program. When the Starter-program is pre-installed one time, Klick & Show is ready to use, with plug-in of Sensor- button. - Page 51 6. Disconnect the Sensor-button at end of meeting. Icon status Description Button Klick & Show TOUCH is initializing State: Button Klick & Show TOUCH is connecting to the receiver State: Sharing State: Ready to share State: Button TOUCH is sharing Disconnection Disconnected or abnormal...
-
Page 52: Transmitting Ios Mobile Device
Transmitting iOS mobile device 7.2.1 How to use airplay? Airplay: Klick & Show supports “Airplay”, which enable mirroring of the desktop of your Apple device to the airplay receiver. Please swipe from bottom on desktop, to activate the control center. Click the airplay icon on your Apple device and select the receiver device Klick &... - Page 53 Functional Zone: Local Files: Can transmit the local file, including Photos, Video, Music to the Base-Unit for playback. File Sharing: Can setup a storage for the PC/Laptop to access/transmit files to the mobile device. Remote View: Shows main screen at mobile device. Allows remote control of mouse of active signal on ...
- Page 54 To access the files, enter the IP address by our PC/Laptop’s web browser while your PC/Laptop has connected to Klick & Show by hotspot connection or LAN connection. PC/Laptop page (iOS) At website you can create folders ( ), select files (pictures, videos, word-doc, PPT, PDF,…). Click , to load data from the laptop and transfer to the iOS mobile unit, which can be shown in “File Sharing”.
- Page 55 Klick „Remote View“ in menu bar, to control your application with mouse, or edit data with displayed keyboard of WirlessMedia APP. All changes can be stored, to capture all results of a meeting. 5. Remote View: Control of mouse and keyboard via WLAN. Click the “Remote View” in menu bar to show the main screen of Klick &...
- Page 56 Mouse Pointer: represent the relative position of the mouse on the main screen. Re-position: reset the positon to be the center of the screen. Back: sends a “Return” command to the Klick & Show Base-unit to go back to the previous directory menu. Red Cross Icon: return to the main interface.
-
Page 57: Transmit Android Device Wireless
Transmit Android device wireless 7.3.1 “WirelessMedia” Apk for Android Open the “WirelessMedia” application: Note: permit access of photos and pictures, when installing. 2. The main interface of “WirelessMedia” is shown as below. It includes the features including: Android above 5.x Menu Bar (Functional Zone): Local Files: Can transmit the local file, including Photos, Video, Music to the receiver for playback. - Page 58 3. Local Files: select the file stored in local Android phone as shown below (Note: at the actual version the memory of internal memory card is not shown). 4. TV Mirror: Click the icon in menu bar to shows main screen of Klick & Show on screen of Android-phone. You can control the PC/Laptop device like a remote mouse with a finger.
- Page 59 Operation Zone: Zone to remote view the active signal and control it as a mouse. Hidden Menu: Click to open the hidden function features, including Back and Keyboard when available. Back: It sends a “Return” command to the Klick & Show Base-unit to go back to the previous directory menu. Keyboard: Open the keyboard to enter character/number.
-
Page 60: Hdmi Input Select
HDMI Input Select When on Home Page, it is used for receiving PC or Mobile devices. Please connect a mouse to either USB 2.0 port of Base-unit, use the Klick & Show Wireless Mouse/Remote Mouse to click the local HDMI input icon, as shown below. -
Page 61: Specification Klick & Show
8. Specification Klick & Show Klick & Show TOUCH Klick & Show K-10S Input Formats Sensor-Button Base-Unit Video input format 1x USB 1x Wireless, 1x HDMI-IN Video compliance / connector USB 2.0 with type A connector IEEE 802.11n/ac, HDMI 2.0 with 19-pin female connector Video input resolution VESA, maximum 4096 x 2160* pixels HDMI 2.0, up to 4K/60Hz/4:4:4... - Page 62 Operation (typical) 10 W; Standby 5 W, Switch off < 1 W Accessories included, Klick & Show K-10S Kit (7488000300) Klick & Show K-10S base unit, 2x antennas, 2x Klick & Show TOUCH sensor-buttons, mounting brackets, quick-start guide, power supply...
-
Page 63: Trouble Shooting
9. Trouble Shooting Here you can find some fundamental problems and possible causes, which can be happen during the use of Klick & Show. Find out the problem you have encountered in the table below and apply the solution. If you still have difficulty, contact your technical support, your dealer or your IT-administrator. - Page 64 power USB device when on battery power. OSD-message: Firmware of Start- Software-version of Starter-program Download actual Starter-program and program does not match! not actual. execute, see chapter 6.4, 6.5. “WirelessMedia” (Android or iOS) for WiFi hotspot password changed, when Connect the mobile device with ...
- Page 65 Video is not shown on screen. The content use HDCP. Klick & Show does not support showing HDCP content. If possible, connect the source device to local HDMI input at Base-unit. When using window 7 the following Klick & Show uses resource from the It is safe to ignore this message and message about the Window Aero color GPU.
- Page 66 Audio signal may be muted. Click with right-mouse button at speaker icon In task-bar and switch on. 7488000300 2017-10 / 844 006 Änderungen vorbehalten / Subject to alterations Printed in Germany Kindermann GmbH · Mainparkring 3 · D-97246 Eibelstadt · E-Mail: info@kindermann.de · www.kindermann.com...