Kindermann Klick & Show Installation And User Manual page 22

audio connection is not necessary. The audio signal is sent together with the video signal to the display.
Note:
If there is no sound from speaker check the settings of volume-mixer in taskbar of laptop, "WirelessMedia" or
"Video-Playback" must be activated.
Audio Output
Connect the analog audio "LINE OUT" (mini Jack 3.5mm) of the Base-unit with the meeting room's sound system
by using a fitting cable.
PC/Laptop Sound
As default set, Klick & Show will mute the internal speaker of PC/Laptop and route the audio to the Base-unit,
after PC/Laptop is successfully mirroring desktop to the main screen, in order to avoid the repeated audio. When
transmission is stopped at Sensor-button, local loudspeaker will return to previous status.
Note:
If there is no sound, check the volume control on your laptop's taskbar, see in"Mixer" if "WirelessMedia" or "Video
Playback" is activated..
To keep the internal speaker of PC/Lap muted while route the audio to the Base-unit, use the audio mute icon in
the status bar.
22