Auto Change Wi-Fi Hotspot Password - Kindermann Klick & Show Installation And User Manual

5.2.4 Auto change Wi-Fi hotspot password

Authentication with a password secures the connection of wireless LAN for authorized users only. To avoid that a
participant of last meeting can view an actual meeting from outside with the APP "Remote View" of
WirelessMedia, the WiFi password will change on a certain configurable time, unless at least one button is
connected to the Base-unit.
The password remains unchanged for all participants of the meeting, while at least one Sensor-button TOUCH or
a WLAN-network of a mobile device are connected with base-unit. After the user is disconnected, a configurable
time runs.
The changeable password will be fixed by connecting a Sensor-button TOUCH to PC/Laptop or connect a

mobile unit to the WLAN of the base-unit, and continue to be changeable after 15s after disconnecting the
last Sensor-button TOUCH or disconnect the WLAN of a mobile unit.
User do not need to re-pair the Sensor-button TOUCH again, if only the password is changed. A Smart

mobile device has to enter the correct SSID and password to connect to the Base-unit hotspot, in order to
access all functionality.
When the last Sensor-button TOUCH (or mobile device) is disconnected for 15 s, it will open up a dialog box

for user to confirm whether to clear the meeting history, including all data/files to be temporarily
memorized in the Base-unit.
Configure to automatically change Wi-Fi password to a random number every period of time.
Click to set the configuration, including
Never: never change Wi-Fi password.

5 minutes: change Wi-Fi password every 5 minutes.

30 minutes: change Wi-Fi password every 30 minutes.

1 hour: change Wi-Fi password every 1 hour.

2 hours: change Wi-Fi password every 2 hours

hours: change Wi-Fi password every 4 hours

24 hours: change Wi-Fi password every 4 hours

Important Notes:
A new WiFi-password for securing your WiFi network can be generated also manually by pushing
screen, also see chapter 2.2.
Even a switched-off mobile unit can hold a WLAN-connection to Klick and Show in the background, and inhibit the
automatic password-change and/or going to Standby-mode!
A change of WoFi-password does only affect the user of mobile units, NOT the sensor-button TOUCH!
Every new WiFi network name SSID needs a new re-pairing of all Sensor-button TOUCH, see chapter 4.2.
in Home
35