3.6
LAN connection
The Base-unit can be connected to a local network or directly to a PC/Laptop. For normal operation, a LAN
connection is not necessary. When needed, it is suggested to connect the Klick & Show to the internet.
The LAN connection can be used for:
network integration of Base-unit
telnet control of the Base-unit
maintenance purpose (in preparation)
Telnet commands
Telnet is a relatively simple, text-based protocol by which a computer of another person can connect via internet
to Klick & Show. Control via TCP/IP (port 5656) is possible. You can find the list of commands in chapter 8.
LAN indicator
LAN "connected" or "disconnected" is shown in a message in lower/right corner on the Home screen.
23