Table of Contents
Advertisement
4.3
Mirroring of the desktop
4.3.1
When you are using Klick & Show for the first time on your laptop or for guests, you have to copy the Starter-
program "WirelessMedia" first on your Laptop / PC. Run this Starter-program.
When the Starter-program is pre-installed one time, Klick & Show is ready to use, continue with Step 5.
There are 4 possibilities for loading and executing the App "WirelessMedia-windows.exe" for Windows or
„WirelessMedia-macOS.app" for MAC:
1. Copy the APP from integrated USB-stick of Sensor-button TOUCH on PC, continue with 5.
2. Download APP from Internet
3.
Download the APP via LAN or WiFI of Base-unit, use IP-addresses in status-bar of Home screen,
continue with 5.
4.
Store APP on a USB-stick at Base-unit: plug a USB-stick to USB port of Base-unit and copy Starter-
program „WirelessMedia.exe" to USB-stick by clicking on symbol
5. Plug a Sensor-button TOUCH to the USB port of your PC or Laptop. The Klick & Show application is
starting automatically and a symbol is displayed in the task bar of the PC/laptop
6. Till the transmitter button shows a static green LED indicator, or till you see a message table showing up
at the right bottom corner of desktop "Ready to share",
7. Click the Sensor-button to start mirroring the desktop on the main screen, LED is static red. An OSD
message shows: logged in user name and if REMOTE control of desktop is locked/unlocked.
8. Click the Sensor-button again, to stop mirroring, LED shows green
9. Disconnect the Sensor-button at end of meeting.
4.3.2
1. Connect your Mobile with the LAN of Klick & Show. Open the App "WirelessMedia" on your phone. Press
symbol "
" for Android, or "
Show.
PC / Laptop
www.klickandshow.com
Mobiles
" for iOS in start page, to get a list of available devices of Klick &
, continue with 5.
.
.
26
Advertisement
Table of Contents
