Table of Contents
Advertisement
Audio Output
Connect the audio (mini Jack 3.5mm) of the Base-unit with the meeting room's sound system by using a fitting
cable.
PC/Laptop Sound
As default set, Klick & Show will mute the internal speaker of PC/Laptop and route the audio to the Base-unit,
after PC/Laptop is successfully mirroring desktop to the main screen, in order to avoid the repeated audio. When
transmission is stopped at Sensor-button, local loudspeaker will return to previous status.
Note:
to keep the internal speaker of PC/Lap muted while route the audio to the Base-unit, use the audio mute icon in the
status bar.
3.6
LAN connection
The Base-unit can be connected to a local network or directly to a PC/Laptop. For normal operation, a LAN
connection is not necessary. When needed, it is suggested to connect the Klick & Show to the internet.
20
Advertisement
Table of Contents
