Table of Contents
Advertisement
Note:
Once the Base-unit is powered, it starts up (booting). From now on please use the POWER button with Status LED
on front of Base-unit to switch on or off.
3.4
Video connection
1.
Connect the HDMI-Output of Base-unit to a 4K or HD display by a quality HDMI cable.
2.
Switch the Base-unit ON.
3.
After started, the system shows the Home page.
3.5
Audio Connection
The WiFI of Sensor-button TOUCH transmits the audio output of the PC/Laptop, re-direct and send to the Base-
unit together with the video signal. The audio will be output at line levels from mini jack socket 3.5 mm
connector and via the HDMI output connectors simultaneously. It is up to the user to decide whether to send the
audio signal together with the video signal.
Audio via HDMI output
When your display/projector is connected via HDMI and it support audio together with video than a separate
audio connection is not necessary. The audio signal is sent together with the video signal to the display.
19
Advertisement
Table of Contents
