Suzuki Grand Vitara Manual page 136

5A-132 Automatic Transmission/Transaxle:
29) Check that inner shaft runs smoothly.
30) Apply grease to lip of new oil lip seal and drive in oil
lip seal with special tool till it contacts transmission
case.
Special tool
(A): 09923–46020
31) Install a new spacer (1) to manual shift lever (2).
32) Install manual shift shaft (3) to transmission case
through manual shift lever.
2
1
33) Drive in manual shift lever pin (1) by using hammer.
34) Align hole in sleeve cover with dent in manual shift
lever and caulk securely with pin punch (1). Then
check that manual shift shaft turns smoothly.
www.CarGarage.ir
IYSQ01510261-01
3
I4JA01512266-01
1
I4JA01512267-01
1
I4JA01512268-01 www.CarGarage.ir
35) Install parking lock pawl (2), parking pawl pin (1) and
parking pawl spring (3).
2
36) Connect parking lock rod (2) to manual shift lever (1)
as shown in the figure.
37) Install parking lock pawl bracket (1).
Tighten parking pawl bracket bolts (2) to specified
torque.
Tightening torque
Parking pawl bracket bolt (a): 7.4 N·m (0.74 kgf-
m, 5.5 lb-ft)
1
3
I4JA01512269-01
1
2
I4JA01512270-01
1
2, (a)
I4JA01512271-01