Intellicenter Control System - Pentair IntelliCenter User Manual

94 |
Setup Wizard [Advanced System Configuration] Outdoor control panel only
Initial System Power Up
First Time Setup: After all required pool/spa equipment has been connected to
the IntelliCenter Control System, apply power to the system at the main panel
circuit breaker. Upon the initial system power up, the outdoor LCD control panel
will display the PENTAIR END USER LICENSE AGREEMENT. Please read this
agreement. To continue, tap the Down arrow on the right side of the screen to
scroll down to the end of the agreement and tap I Accept to accept the agreement.
The Home screen is then displayed.
Note: The Pentair End User License Agreement is displayed only one time after
the initial system power up.
PENTAIR END USER LICENSE AGREEMENT

IntelliCenter Control System

Setup Wizard (First Time Setup): To start the Setup Wizard for the first time, from
the Home screen, tap Settings > Advanced System Configuration > Wizard. The
following screen is displayed:.
IntelliCenter™ Control System Setup
Welcome!
The IntelliCenter™ Control System Setup Wizard
will guide you through the system
configuration for your pool/spa equipment.
Help/
Exit
Menu
Wizard
Import a System Configuration?
Import Configuration?
Caution! If you import a system configuration
file, this option will overwrite the current
configuration.
Help/ Exit
Menu Wizard
Continue to next page.
IntelliCenter Control System User's Guide
I Accept
YES
Back/ Next/
Summary
Home
Note: After you tap I AGREE on the
Pentair End User License Agreement the
IntelliCenter™ Control System Wizard
dialog is displayed.
IntelliCenter Control System Setup
Wizard: The first Setup Wizard
configuration screen, Displays the
current system firmware version.
Help/Menu: Tap to display the Help
text. Tap hold and release to display the
Wizard MAIN MENU options.
Firmware version 1.0
Exit Wizard: Tap this button to exit the
Next
Setup Wizard and return to the Home
screen.
Next: Tap Next to continue with the
Setup Wizard and display the Detected
Hardware screen.
Import System Configuration:
Yes: Use this option to Import a system
configuration file (.CFG) from a USB
device plugged into the USB Port on
the front of the IntelliCenter Control
System Outdoor control panel. Note:
This option will overwrite the current
system configuration.
No: Tap No then Next to continue with
the Setup Wizard.