Vacation Mode (See Page 38) - Pentair IntelliCenter User Manual

Schedule - Offset the Sunrise/Sunset Time
Select Stop Time
Manual Sunrise
Program will start
2:55 am
Offset Program
Select Stop Time
Manual Sunrise
Program will start
5:55 pm
Offset Program
Vacation Mode Schedules - One Time Only (Vacation Mode see page
Vacation Mode
Vacation Mode
Schedules
Duration
Start Date
Stop Date
Vaction Mode Schedules Schedules
Add Program Add Program
Spa Pool
Pool
Pool Lights
Sunset
Today's Sunrise
4:55 am
2:00
Sunset
Today's Sunrise
4:55 am
2:00
ON
GRP1 Lts/Pmp/Htr
ON
Sept. 02, 2017
Jan. 02, 2018
8:00pm-5:00pm 8:00p-11:00p
Weekdays: M Tu W Th F Wed June 14
8:00p-11:00p
Everyday
8:00p-11:00p
Weekdays: M Tu W Th F
Start/Stop Time Screen: Set the
start and stop time for the program.
Manual: Select Start time duration
(AM/PM).
Sunrise: The Sunrise and Sunset
times are based on the system time
established from the area and location
(zip code and time zone setting) of the
system. See page 40.
Sunrise Offset Program: The Sunrise
and Sunset Offset time can be adjusted
up to a maximum of 6 hours.
Sunset Program Offset
Hours
02
Before
Vacation Schedules: When the system
is in Vacation Mode, you can setup a
Weekly or One Time Only schedule
while on vacation the same way as you
would for a non-vacation schedule.
Note: When in Vacation Mode, the
Schedule icon is replaced with the
Vacation icon which is displayed on the
Home screen to indicate the system is
in Vacation Mode.
IntelliCenter Control System User's Guide
| 25
Minutes
00
)
38