Pool/Spa Cover - Pentair IntelliCenter User Manual

Installation (Pool and Spa Cover)
From the Installation Setup screen, Tap Pool and Spa Cover to display the
Pool and Spa Cover Select screen. The system supports two pool or spa
covers (Pool/Spa Cover 1 or Pool/Spa Cover 2) one cover for each body of
water. From the Pool/Spa Cover settings you select which circuits to switch
OFF and ON when the pool or spa cover is closed or open.
Pool or Spa Cover Position: "OPEN" and "COVERED" is displayed on the Home
screen to indicate the current position of the cover. The cover connection is via an
RS-485 COM Port on the IntelliCenter™ Control System Expansion Card.
Pool Cover 1 Settings
Valve Type
Cover Enabled
Valve Type
Cover State Normally
Affected Circuits
IntelliChlor Active
IntelliChlor Output
Select Pool Cover
Cover 1
Cover 2
Disabled
Open
Configure...
OFF
20
Pool Cover Settings:
Cover Enabled: Select either Enabled
or Disabled.
Cover State Normally: Select either
Closed or Open for the state that the
pool or spa cover is usually in.
Affected Circuits: Select the circuits
that you want to switch OFF/ON when
the pool or spa cover is closed or open.
Tap Check to save and return to the
Settings screen.
IntelliChlor Active (0-40): Select ON to
switch the IntelliChlor SCG circuit OFF
when the pool or spa cover is closed.
IntelliChlor Output: While the pool
or spa cover is closed, select the
IntelliChlor SCG chlorine output from 0
to 50 %.
IntelliCenter Control System User's Guide
| 79