Vacation Mode - Pentair IntelliCenter User Manual

38 |

Vacation Mode

If you are planning a vacation and want to create a pump/filter daily schedule
while on vacation, you can setup a start and stop date to run a daily pool/spa
filter schedule. When you return from vacation the system will continue with the
previous non-vacation mode schedule.
Vacation Mode
Vacation Mode
Schedules
Duration
Start Date
Stop Date
Vaction Mode Schedules Schedules
Add Program Add Program
Spa Pool
Pool
Pool Lights
Vacation Start Date
Sept
305 days to start Vacation
Vacation Stop Date
Jan
61 days to stop Vacation
IntelliCenter Control System User's Guide
ON
GRP1 Lts/Pmp/Htr
ON
Sept. 02, 2017
Jan. 02, 2018
8:00pm-5:00pm 8:00p-11:00p
Weekdays: M Tu W Th F Wed June 14
8:00p-11:00p
Everyday
8:00p-11:00p
Weekdays: M Tu W Th F
02 2017
02 2018
Vacation Mode: ON: Turn on Vacation
Mode (manually enabled, no end date
and time). OFF: Turn off Vacation Mode.
Note: Previous vacation schedules will
remain in memory and can be enabled
again for future use.
Schedules: Set up a Weekly or One
Time Only schedule for the duration of
the vacation time. See Schedules
on page 20. Note: To indicate the
system is in Vacation Mode, the
Schedule icon displayed on the Home
screen is temporally replaced with the
Vacation icon. Tap Vacation to see the
current vacation schedules. See Home
Screen on page 8.
Duration: ON: Set Start & Stop date for
duration of schedule(s). OFF: Duration
for vacation schedules is disabled
(no Start & Stop date has been
established).
Vacation Start Date: Set the vacation
start month, day and year. The number
days before the vacation start date are
shown on the screen.
Vacation Stop Date: Set the vacation
end month, day and year. The number
days before the vacation stop date are
shown on the screen.