Pentair IntelliCenter User Manual page 11

For pool and spa
Hide thumbs Also See for IntelliCenter:
Table of Contents

Advertisement

Navigation
(Continued)
Features and Light Green Number Badge: Indicates the number of
3
Features or lights currently activated.
Status Icon Number Badge: Indicates the number of Alerts and Warnings
1
present in the Status Screen. Items shown in the Status can be selected
from the Alerts & Notifications Screen Note: To select or hide Status
Badge icons, see Settings > Alerts and Notifications, on page 45.
Home Screen Pool and Spa Status Badges: Note: Shared equipment one
badge for each body.
Green Badge. A Green (Schedule) badge displayed on the on the Home
78°
screen Pool/Spa icon indicates that a programmed schedule is active.
84°
Yellow Badge (Pool/Spa filter pump turned on): A Yellow Badge indicates
a delay is in progress. Delays: (Heat Cool-Down (pump), Valve Rotation
78°
Delay, Pump Priming). Note: For Pool and Spa (shared equipment
systems), when the pool or spa pump is turned on, the Yellow badge
84°
displays on the pool or spa icon; not on both at the same time. See page
44 to hide/show Yellow and Blue Badges.
Blue Badge (Pool/Spa pump turned on): A Blue Badge indicates that the
78°
Pool/Spa pump has been turned on.
Using Override Delays (see page 87):
84°
• Go to Delays and tap Override Delays.
• Override Delays will cancel all active delays. If a Schedule is running, a
Green Badge will display. If the pool/spa pump is manually enabled (ON/
OFF), a Blue badge will display.
Valve Type
Valve Delay
Heater Cool Down
Frz Cycle Time (min)
Spa Frz Override (min)
Override Delays
°
78
78
78
°
Delay Settings
Badge Color Changing Sequence:
°
The color badges shown on left indicate No heater (Off)
installed.
Yellow changes to Green: A schedule has started running.
Yellow changes to Blue: Pool/Spa pump has been manually
turned ON. Blue will stay on until pool/spa pump is manually
turned off. Note: Blue Badge will stay on for the Egg Timer
duration (12 hrs. default). If the Egg Timer is set to Don't Stop
to circuit will run continuously until manually is switched off.
OFF
OFF
15
30
Cancel
IntelliCenter Control System User's Guide
| 3

Advertisement

Table of Contents
loading

Table of Contents