Pumps (Intelliflo Vsf) - Pentair IntelliCenter User Manual

66 |
Pumps (IntelliFlo
+ Add Pump: To an IntelliFlo VSF pump, tap + Add Pump to access the pump
type screen and select IntelliFlo VSF.
Pumps (9 of 16)
Add Pump
Filter Pump 1
Type: Single Speed
Filter Pump 2
Type: IntelliFlo VF
Filter Pump 3
Type: IntelliFo VS
Filter Pump 4
Type: Two Speed
IntelliFlo VSF Settings: Pump Type, Name, Address, Min. Speed (450 RPM), Max.
Speed (3450 RPM), Min. Flow (GPM 20 GPM), Max. Flow (140 GPM), Step Size
(10-250 RPM), and Step Size (1-10 GPM). For information about priming the pump,
see page 70.
Pump Type: To change the pump type
(function), tap Pump Type button to
access the pump type screen. Select
the pump for the list. Tap Check to
save the new pump type and return to
the previous screen.
Pump Name: Tap the Pump Name
button and enter the name of the
pump. Tap Check to save the name
and return to the previous screen.
Pump Address: Assign the pump
address from 1-16.
Minimum Flow (GPM): This is the
minimum flow rate speed but still
generating sufficient flow in the pool.
The IntelliCenter™ Control System
will not run lower than 20 GPM. The
lower you can establish this flow rate
the better the energy savings.
Maximum Flow (GPM): This is generally the flow rate required for backwashing the
pool filter. The pump will not allow a higher flow rate of 140 GPM to prevent damage
to the pool system hydraulics.
Step Size (RPM): The pump speed step size can be set from 10-250 RPM.
Step Size (GPM): The pump flow rate step size can be set from 1-10 GPM.
IntelliCenter Control System User's Guide
VSF)
®
VSF #3 (IntelliFlo VF) - Address 5
Settings
Speed / Flow Circuits
Pump Status
VSF (IntelliFlo VSF) - Addr: 2
Pump Type
Pump Name
Pump Address
Min Speed (RPM)
Max Speed (RPM)
Min flow (GPM)
Max Flow (GPM)
Step Size (RPM)
Step Size (GPM)
IntelliFlo VSF
VSF
2
450
3450
20
134
100
1