Pentair IntelliCenter User Manual page 66

58 |
Using Feature Circuits
Create A Feature Circuit (Lights/Circuits): From Settings > Advanced System
Configuration > Installation Setup > Circuits > Feature Circuits > Add Group (Four
Dots Icon you can create a group of Lights or AUX auxiliary Circuits. These Groups
of lights and auxiliary circuits are displayed in the Features > Groups screen. You
can also create groups of auxiliary and light circuits in the GROUPS screen (see
page 48), which will be displayed in the Features > Groups screen.
From the Feature Circuit screen you can create a group of circuits for Lights or
Circuits (see page 56).For example, you could create a Feature Circuit assigned to
one button to turn on your spa, spa light, fountain, fountain light, and patio lights.
A Feature Circuit also has the capability to switch a circuit off. You could also
create your own custom name, for example, SPA PARTY could be used if there was
a spa fountain which should not be on when spa is on (because it could put cold
water in the spa) it can be set up in the Feature Circuit to automatically switch off
when Spa Party is switched on. A Feature Circuit can also be used to switch off
any number of lights with one button.
Note: A Feature Circuit may not be assigned to light dimmers although they can turn
on light dimming circuits.
Note: When setting up Feature Circuits, one Feature Circuit can turn on another
Feature Circuit, which might result in the system turning on (or off) a circuit that you
don't wish to turn on (or off).
Feature Circuits (Create a Group of Lights or Circuits)
AUX Circuits
Spa
Function: Spa
AUX 1
Function: IntelliBrite
AUX 2
Function: IntelliFlo
Waterfall
Group Type
Function: Generic
Light Group
AUX 5
Function: Generic
Circuit Group
Group Name
Included Lights
Egg Timer
Color Settings
Egg Timer: Tap the Egg Timer button to display the Hours and Minutes button.
Tap the Hours and Minutes button to select a manual time-out from 0 to 23 hrs.
59 mins. for the circuit. The Egg Time is a specified time delay (hrs/mins) for the
circuit, once it is turned on manually.
Don't Stop: Tap the Hours button until 23 hours is displayed, then tap the button
again to display Do Not Stop. The Do Not Stop feature will continuously run the
circuit until the it is manually turned off.
IntelliCenter Control System User's Guide
Spa
Pool Light
Pool Pump
Booster Pump
AUX 5
All Yard Lights
3
0hr. 0min.
(4 Dots Icon): Tap the 4 Dots icon on
right side of the screen to display the
Add Group screen. Note: For more about
creating groups of circuits, see page
Groups on page 48.
Select either the Light or Circuit Group.
Enter a name form the group of lights
or circuits.
Select Included Circuits: Tap Included
Circuits (or Lights) and select the
available AUX circuits and Features
Circuits to be assigned to this group of
circuits.
Color Settings (Delays): Adjust the
AUX delay time (1-59 seconds) between
lights.