Pumps; Pumps (Single Speed) - Pentair IntelliCenter User Manual

62 |
Pumps (Single Speed, Dual Speed, IntelliFlo
Single Speed Pump
+ Add Pump: To add a pump, tap + Add Pump to access the Select New Pump Type
screen to setup the pump settings. Pump types are: Single Speed, Dual Speed,
IntelliFlo VS, IntelliFlo VSF, and IntelliFlo VF.
Pumps (9 of 16)
Add Pump
Filter Pump 1
Type: Single Speed
Filter Pump 2
Type: IntelliFlo VF
Filter Pump 3
Type: IntelliFo VS
Filter Pump 4
Type: Two Speed
Single Speed Pump Settings
Pump Type
Pump Name
Pump Circuit
Operating a Single Speed Filter Pump: To manually turn the filter pump on or off,
tap the Pool Filter Pump button on the second Pool screen (on Home screen). If
the heater is on and active, and Heater Cool down feature is enabled; when you
tap Pool Filter Pump button to turn off the filter, only the heater will turn off and
the pool filter pump will automatically turn off after 5 minutes of heater cool down
period. You can override the heater cool down period by taping the button again to
turn off the filter pump.
IntelliCenter Control System User's Guide
Single Speed
Pool Pump
Pool
VS, VSF, VF)
®
Select New Pump Type
Single Speed
Dual Speed
IntelliFlo VS
IntelliFlo VSF
IntelliFlo VF
Single Speed Pump Settings: From the
Single Speed Pump Settings screen
you can change the pump type, name
and assign the pump to a body of water
(pool, spa, or pool/spa.
For information about priming the
pump, see page 70.