Pentair IntelliCenter User Manual page 25

Lights (Groups)
The Light Groups Sync, Swim and Set SAm feature are configured from
Settings > Groups. The SAm feature supports IntelliBrite
GloBrite Light (Color and White), and MagicStream
®
about creating light groups, see page 49. From the Groups screen, light groups
can be added, and each light color and delay (0 to 60 seconds) from the Groups
screen. Select the group of lights to change. Tap Color Settings. Set the delays
between the lights from 0 to 60 sec.
Group Name
Included Lights
Egg Timer
Color Settings
Individual
Lights Group 1
Landscape LT Grp
All Lights OFF
Waterfall LT Grp
Sync (SAm Color Swim effect): Tap this momentary button to synchronize
(Green light on) all IntelliBrite lights in the group. The Light in the group
will go to the beginning of the SAm rotation. After 21 seconds the lights will
start rotating eaach time the button is tapped.
Note: Also this feature also works for indivdual legacy SAm lights).
Color Set: Tap this momentary button to activate (Green light on) to set the
default color for each light then stop the light on one of the selected eight
(8) colors.
Swim (SAm Color Swim effect): Tap this momentary button to activate
(Green light on) an effect of moving colors across the pool. From the Swim
Settings Delays screen set a delay between the lights so that the first light
syncs and starts rotating, then the second light starts rotating after that,
and the third light rotates after that with a delay between the lights.
To change the light color or the light delay (from 0 to 60): Tap Settings > Groups.
Select the group of lights to change. Tap Color Settings. Set the delays between
the lights from 0 to 60 sec.
Continued
All Yard Lights
3
0hr. 0min.
Light Groups
Groups
, ColorCascade
®
lights. For more information
®
Select Circuit to Edit
Beach Light
Back Yard Light
Pool Light
Pool Light 2
Spa Light
Edit (Pencil): Display the Light
Settings screen.
Lights in Groups: Displays the
light circuit name and color. Note: All
light will display the same color if All
Light Same Color is enabled (ON) from
the Group Settings screen. To display
different fixed colors for each light,
select All Light Same Color (OFF).
IntelliCenter Control System User's Guide
| 17
,
®
Delay 0s
White
Delay 15s
Light Green
Delay 25s
Green
Delay 35s
Cyan
Delay 55s
Blue