Pentair IntelliCenter User Manual page 31

Schedule - One Time Only
Scheduled One Time Only
Fri, Jan, 12 2018
Circuit
Start Time
Stop Time
Heat Source
Set Temperature
Select Start Time
Manual Sunrise
: 1 00
AM
Select Stop Time
Manual Sunrise
: 9 00
AM
Scheduled One Time Only
Fri, Jan, 12 2018
Circuit
Start Time
Stop Time
Heat Source
Set Temperature
(Continued)
Pool
8:00
5:00
Gas
_
+
77
Sunset
8h 00m
Sunset
8h 00m
Pool
8:00
5:00
Gas
_
+
77
Start Time (Manual): Set the
start time (am/pm) for the Weekly
schedule.
Duration: Start time duration: The
equivalent time left after the start time
is established (e.g. 1:00 AM to 9:00
AM. The system clock calculates the
duration between the start and stop
time which is 8 hours. 24 Hrs. duration
is display when the Start/Stop time
is set to 8 AM to 8 PM. Note: To offset
Sunrise and Sunset start time.
Stop Time (Manual): Set the stop time
(am/pm) for the Weekly schedule. see
page 24.
Duration: Stop time duration: The
equivalent time left after the start time
is established (e.g. 1:00 AM to 9:00
AM. The system clock calculates the
duration between the start and stop
time which is 8 hours. 24 Hrs. duration
is display when the Start/Stop time is
set to 8 AM to 8 PM. Note: To offset
Sunrise and Sunset start time, see
page 24.
Heat Source: Tap Heat Source and
select: Off, Heater, Solar Only, or Solar
Preferred. Heat Pump Only, Heat Pump
Preferred. To create a heat source
go to Settings > Advanced System
Configuration > Installation Setup
> Heaters, See page 72 for more
information.
Set Temperature: Tap the plus or
minus button to set the Heat Source set
point temperature from 40° F
to 104° F.
IntelliCenter Control System User's Guide
| 23