Pentair IntelliCenter User Manual page 103

Setup Wizard [Advanced System Configuration]
Import for USB: Insert a USB device into the USB Port on the IntelliCenter™
Control System Outdoor or Indoor control panel. Tap Import from USB and
navigate to the system configuration file (.CFG). Follow the on screen instructions
to import the system configuration files plugged into the USB Port on the Outdoor
or Indoor control panel.
Local or Copy from Remote: These options will overwrite the system configuration
using a configuration file. Navigate to the appropriate folder and select the
Configuration file (.cfg) to import. For more information, see page 89.
Detected Hardware
Setup had detected the following hardware:
Personality: i5PS
Expansion Module1: None
Expansion Module2: None
Expansion Module3: None
Expansion Module4: None
Help/ Exit
Wizard
Menu
What is your Zip code / Location
Zip Code
11220
Latitude
Y Coordinate
Longitude
Y Coordinate
Time Zone
Eastern Time (US & Canada)
Help/ Exit
Menu Wizard
Would you like to set the Date & Time?
Jan. 12, 2018 6:60 pm
Update Date & Time
Help/ Exit
Wizard
Menu
Note: If the PC time and date do not match
the time and date displayed on the Home
screen, you need to reset the PC time to
match the date and time of the IntelliCenter
Control System. See page 40 for more
information.
Back/ Next/
Summary
Home
Brooklyn, NY
United States
40.65°
-73.94°
UTC/GMT -5
Next/
Back/
Summary
Home
YES
Back/ Next/
Summary
Home
Detected Hardware: Displays the
installed IntelliCenter™ Control System
Personality main circuit board and
Expansion Cards (if applicable). See
page 106.
Next: Tap Next to continue to the Zip
Code / Location settings screen.
Back/Home: Tap Back to go to the
previous screen. Tap hold and release to
the first Wizard screen.
Exit Wizard: Tap this button to exit
the Setup Wizard and display the exit
options (No, Yes, Discard).
Update date & Time: Tap Yes and
Next to update the system date and
time.
Clock Mode: Select either 12 hour or
24 hour mode.
Daylight Saving Time: Select ON to
automatically set the yearly daylight
saving time for your location. Select
NO to manually change the daylight
savings time for your location.
Converting a 12 hr. time to 24 hr.
(military time) is from 1:00 PM to
11:59 PM, then add 12 hours, and
from 12:00 AM (midnight) to 12:59
AM subtract 12 hours.
Zip Code / Location Screen: After the
IntelliCenter™ Control System has
verified the login information
successfully, the Location screen is
displayed. Tap any setting to update
the location information. See page
40.
Continue to next page.
IntelliCenter Control System User's Guide
| 95