Setting Up The Intellitouch System Using The Indoor Control Panel Or Mobiletouch; The Preference Screen Options - Pentair INTELLITOUCH User Manual

Setting up the IntelliTouch System using the Indoor Control Panel or
MobileTouch
The following describes how to configure and set up the IntelliTouch system using the Indoor Control
Panel or MobileTouch wireless control panel.

The Preference Screen Options

From the Preference screen you can change various screen options.
To change the screen settings go to the Preferences screen.
1. To change the display backlight: Press the top left or right side button to select the following
options: OFF IN 5 MIN, BLANK IN 5 MIN, and ALWAYS ON.
2. To change the display contrast: Press the left button
to decrease the display contrast level (lighter). Press the
right side button to increase the display contrast level
(darker).
3. To change the brightness of the LED lights: Press
either the left or right side button to set the LED
brightness level to 100%, 75%, 50%, or 25%.
4. To change the display backlight brightness: Press
either the left or right side button to set the Backlight
Brightness level to 100%, 75%, 50%, or 25%.
5. To turn the button beeper sound off/on: Press the
button next to User Interface. From the next screen,
press the button next to Beeper Level to OFF. To switch
ON the sound, select HIGH. Press the Back button
when finished.
Note about Key Repeat: It is recommended to leave the
Key Repeat Delay and Rate set to the factory default
setting (1/2 and 15 PS). The Key Repeat Delay adjusts
the amount of time a key/button has to be held down
before it starts auto-repeating. Key Repeat Rate adjusts
the number of times per second (5, 10, 15, or 20 key
repeats per second) the key/button repeats once it is held
down.
6. When finished, to save the settings press the Exit button
to return to the main screen.
15 PS
IntelliTouch Control System User's Guide
®
33