Pool - Pentair IntelliCenter User Manual

Pool

Tap the Home screen Pool icon to display the Pool Pump control settings screen.
From this screen tap the Pool Pump button to activate the pool pump. A Blue badge
displayed on the Pool icon indicates the Pool/Spa pump button has been manual
turned on. The Blue badge displays until the pump button is turned off. The badge
displays the current pool water temperature. If there is a heat source active, a
flame icon is displayed with the pool water set point temperature. Note: For more
information about screen badges, see page 3.
Air Temp 65° F
78°
84°
Pool Spa
Schedule Usage
Pool
77
Pool
Temp
Heat Mode
Heater
Select Heat Source for Pool
Off
Heater
Solar Only
Solar Preferred
Heat Pump
Note: The displayed heat sources are
configured from Settings > Advanced
System Configuration > Installation Setup >
Circuits, see page
Heat Mode Button: Tap the Heat Mode
button to select the heat source type: Off
(no heat source), Heater, Solar Only, Solar
Preferred, Heat Pump, UltraTemp (Hybrid)
or UltraTemp (Hybrid) Preferred. Note: To
add a heater, see page 72.
8:00 A.M.
3
Features
6.50
4
0
Chemistry Status
Pool
Heating
Set Point
78
°
°
56
.
Pool Badge Icons: A Flame icon (heat
source active) is displayed with the
current heat set point temperature.
3
A Snow Flake icon indicates the
UltraTemp Heat Pump or Solar Heat (if
enabled) is in cooling mode. A Sun icon
Lights
indicates solar heat is active. Select
the heat source from the Select Heat
Source screen.
Heat Mode indicators:
Flame:
Heat Source Nocturnal
Active
Pool Pump On/Off Button: Tap this
button to turn the Pool Pump on to
activate the heater. Tap the Heat Mode
button to select a heat source. Note:
When the heater is turned it will
activate the pool/spa pump when the
Heating Set Point is above or at the
current water temperature reading.
Note: The Pool button name can
changed (up to nine characters),
go to
Settings > Advanced System
Configuration > Installation Setup > Body
Configuration, see
Heating Set Point: Use the Up/Down
button to increase or decrease the heat
set point temperature.
Pool Temperature: Displays the
current pool water temperature in
Fahrenheit or Celsius, see page 41.
Snow Flake: Sun:
Solar
Cool Down Heat Source
page 55.
IntelliCenter Control System User's Guide
| 9