Chapter 3
Notes
Note the following issues when connecting the ETERNUS DX to a server.
3.1
Connection Notes for PRIMERGY
To ensure reliable access to the storage systems, the following methods are recommended:
•
Connection via multiple paths
-
Use of multipath drivers which support path redundancy control
-
Configure a multipath environment and select a multipath driver that supports path redundancy control
to increase redundancy and reliability of the connection between the ETERNUS DX storage systems and
the server.
•
LUN recognition by the Windows
•
The following cluster configuration is supported for Windows
-
WSFC (Windows Server Failover Cluster) configuration
MSCS (Microsoft Cluster Service) configuration
-
For details on servers which support cluster configuration, consult your FUJITSU sales representative.
3.2
Connection Notes for Other Companies' Industry Standard
Servers
•
To build a cluster configuration for Windows
over Cluster (WSFC), and MSCS- and WSFC-compatible applications. This cluster configuration must also use
only one type of SAS card. Operation cannot be guaranteed if the cluster is configured using multiple types
of SAS cards.
•
LUN recognition by the Windows
To ensure reliable access to the storage systems, the following methods are recommended:
•
Connection via multiple paths
-
Use of drivers for ETERNUS DX storage systems which support path redundancy control
-
Configure a multipath environment and select a driver for ETERNUS DX storage systems that supports
path redundancy control to increase redundancy and reliability of the connection between the ETERNUS
DX storage systems and the server.
®
plug and play function cannot be guaranteed.
®
plug and play function cannot be guaranteed.
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows
Copyright 2020 FUJITSU LIMITED
®
:
®
, use Microsoft Cluster Service (MSCS), Windows Server Fail-
9
®
P3AM-3442-18ENZ0