Install Liners - Valor 1100JN Installation & Owner's Manual

QUALIFIED
INSTALLER

Install Liners

The following guidelines apply for all liners with the
exception of the 1170RGL Refl ective Glass Liners—
see installation manual supplied with liners.
1. Inside the fi rebox, on the top of each side, release
the screw of the side panel anchors if necessary so
they can rotate freely (one per side).
2. Insert the bottom of one of the side liner panel
between the burner and the side wall and rotate it
slightly to insert it totally inside the fi rebox. Push it
gently against the side wall. Rotate the side panel
anchor to hold the panel in place.
3. Place the rear panel against the back of the fi rebox
behind the rail retainers at bottom and behind the
side panel already installed.
Note: If you are installing the optional 1105RGL—
Refl ective Glass liner panel (with 1125FBL—Fluted
Black Liners or 1160PBL—Black Liners),
54
Installation
place the refl ective panel, smooth side visible, in
front of the rear ceramic panel, held in place as well
by the bottom rail retainers.
4. Insert the bottom
of the other side
liner panel between
the burner and the
side wall and rotate
it slightly to insert
it totally inside the
fi rebox. Push it gently
against the side wall.
Rotate the side panel
anchor to hold the
panel in place.
5. Insert the top panel, beveled edge towards the
back of the fi rebox, on top of one side panel, slide it
across to rest on both side panels and rear panel.
top
underside
(fi re side)
rear ceramic
panel
without 1105RGL—
Refl ective Panel
top
underside
(fi re side)
refl ective
panel
(optional)
rear ceramic
panel
with 1105RGL—
Refl ective Panel