Valor 1100JN Installation & Owner's Manual page 9

• Press and hold
button to decrease fl ame height or
to set the appliance at pilot fl ame.
• For fi ne adjustment tap the
(large fl ame) or
buttons.
Express Low and High Fire
• Double-click
button. "LO" will be displayed.
NOTE: Flame goes to high fi re fi rst
before going to designated low fi re.
x 2
• Double-click
button. Flame automatically goes
to high fi re. "HI" will be displayed.
x 2
SETTING ºC/24-HOUR OR ºF/12-HOUR CLOCK
• In MAN mode, press OFF and
(small fl ame) buttons until display
changes from Farenheit/12-hour
clock to Celsius/24-hour clock and
vice versa.
SETTING THE TIME
• The time display will fl ash after
either:
•
Installing the battery or
•
Simultaneously pressing the
(large fl ame) and
buttons.
• Press
set the hour.
• Press
set the minute.
• Press OFF or simply wait to return
to MAN mode.
Using the Remote Control
(small fl ame)
(small fl ame)
(small fl ame)
(large fl ame)
(small fl ame)
(large fl ame) button to
(small fl ame) button to
MODES OF OPERATION
• Briefl y pressing the SET button
changes the mode of operation in
the following order:
M A N
→
to
M A N
NOTE: Manual mode can also be reached by pressing
either the (large fl ame) or the
fl ame) buttons.
•
M A N
Flame Height Adjustment.
•
TEMP
ture Mode (Appliance must be in
standby mode; pilot ignited) - The
room temperature is measured and
compared to the set temperature.
The fl ame height is then auto-
matically adjusted to achieve the
Daytime Set Temperature.
• - Light/Dimmer Setting Mode
Not available on this fi replace.
•
and OFF and adjusts fan speed.
NOTE: To turn OFF fan press
OWNER'S
INFORMATION
→ → →
TEMP
→ → and back
TIMER
T E M P
.
(small
- Manual Mode - Manual
- Daytime Tempera-
- Fan Mode - Turns fan ON
(small fl ame) until all 4
speed level bars disap-
pear.
9