Valor 1100JN Installation & Owner's Manual page 11

SETTING THE "NIGHTTIME SETBACK" TEMPERA-
TURE
Default Settings:
T E M P
• Briefl y press SET button to scroll to
TEMP
the SET button until the TEMP
fl ashes.
• Press
increase
Temperature.
• Press
decrease
Temperature.
• Press OFF or simply wait to
complete programming.
Using the Remote Control
--
(moon), " " (OFF)
(moon) mode. Hold
T E M P
(large fl ame) button to
Nighttime Setback
(small fl ame) button to
Nighttime Setback
SETTING PROGRAM TIMERS
• You can program two periods of time between 12:00
am and 11:50 pm in each 24-hour cycle.
• The Programs P1 and P2 must be set in the
following order during a 24-hour cycle:
and .
P2 P2
• The icon indicates the beginning of the period (ON)
and the icon indicates the end of the period (OFF).
• If = or
P1 P1 P2
is cancelled.
• To keep the fi replace ON all night, set
11:50 am and
P1
Default settings:
Program 1: 6:00 am
P1
Program 2: 11:50 pm
P2
• Briefl y press SET button to scroll to
TIMER mode.
SETTING P1 ON TIME
• Hold the SET button until
(sun) is displayed and the time
fl ashes.
• Press
set the hour.
• Press
set the minutes.
OWNER'S
INFORMATION
,
P1 P1
= , the programming
P2
at
P2
at 12:00 am.
8:00 am
P1
11:50 pm
P2
P1
(large fl ame) button to
(small fl ame) button to
,
11