Operating Your Fireplace; Fireplace Control Devices; How To Turn Your Fireplace Off (Including Pilot); How To Ensure Your Fireplace Cannot Be Turned On Inadvertently - Valor 1100JN Installation & Owner's Manual

Fireplace Control Devices

There are two ways to control your
fi replace.
1. Thermostatic Remote Control;
2. Wall Switch.
The Thermostatic Remote Control can
be programmed to function automatically—
see pages 8–13.
The Wall Switch can be used to turn on,
off and to increase or decrease the fl ame
height—see page 13.
How to Turn Your Fireplace OFF
(including pilot)
Familiarize yourself with each of these methods before
operating your fi replace.
Press and hold the OFF button for a second (either on
the handset or the wall switch).
Remote control
handset
If the fl ames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
indicating that the valve has received the signal from
the remote control.
As well, familiarize yourself with the gas shut-off valve
location in your house. As indicated below, the gas is
running when the handle is parallel with the pipe. The
gas is off when the handle is perpendicular with the
pipe.
ON: parallel to pipe

Operating Your Fireplace

Thermostatic
Remote
Control
Wall Switch
Wall Switch
(optional)
OFF:
perpendicular
to pipe
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
You can use one of the two following methods to
ensure that your fi replace will not turn on when you
don't want it on.
First, ensure your fi replace is turned off —including
the pilot—and cold BEFORE going ahead.
Fireplace
Receiver Gas valve
The receiver and gas valve are located on the bottom
of the fi replace under the removable panel. The battery
holder is located next to the wall switch.
• Turn the dial on the gas valve from the ON position
to the MAN position as shown. Turning the dial to
MAN (arrow up) will ensure that the main burner
can not come on. The pilot will remain on if it is lit.
ON
• Alternately, remove all batteries from the battery
holder next to the wall switch as well as the battery
from the handset.
Automatic Shut-Off (in certain conditions)
Your fi replace's remote control is equipped with an
automatic shut-off mechanism which is activated in
certain conditions. See page 13 in the Remote Control
Operation section for a description of this feature.
OWNER'S
INFORMATION
Battery holder
& wall switch
Gas valve
7