DFI KS070-AL User Manual page 37

USB Configuration
This section configures the parameters of USB devices.
XDCI Support
Enable or disable xDCI device (Extensible Device Controller Interface) to enable or dis-
able the USB OTG device on the board.
Chapter 7 BIOS Setup
Chapter 7
PCI Express Configuration
This section configures the settings of PCI Express root ports.
PCI Express Root Port 1
Controls the PCIe signal of the M.2 slot.
PCI Express Root Port 3
Controls the PCIe signal of LAN Port 1.
PCI Express Root Port 4
Controls the PCIe signal of LAN Port 2.
PCI Express Root Port 5
Controls the PCIe signal of Mini PCIe slot.
Press "Enter" to enter the configurations for each PCIe root port as shown on the next page.
37
www.dfi.com