DFI KS070-AL User Manual page 41

Boot
Setup Prompt Timeout
Select the number of seconds the system will wait before booting the original firm-
ware selection.
NumLock State
This allows you to determine the default state of the numeric keypad at boot. By
default, the system boots up with Num Lock on. When set to Off, the function of the
numeric keypad is the arrow keys.
Network Stack
Enable or disable network stack. It supports the operation of these functions or soft-
ware: Windows 8 BitLocker Network Unlock and UEFI IPv4/IPv6 PXE.
PXE Boot Capability
Enable or disable Preboot eXecution Environment (PXE) boot through the Ethernet.
This function can only be enabled if the Network Stack support is enabled.
USB Boot
Enable or disable USB boot from a flash drive.
Chapter 7 BIOS Setup
Chapter 7
Note:
The BIOS supports only UEFI boot but not legacy.
EFI
Enter this menu to select the priority of the UEFI boot devices. Use the "+" key to move
an item up or the "-" key to move an item down. The one on the top of the list has the
highest priority.
41
www.dfi.com