5.
Slide the Panel PC to "wall mount bracket 1" to attach the two brackets with the hooks.
Then tighten the screw to secure the assembly in place.
Chapter 6 Mounting Options
Chapter 6
Screw
30
Panel Mount
Note:
The system unit used in the following illustrations may not resemble the actual one.
These illustrations are for reference only.
The panel mounting kit includes the following:
•
6 mounting clamps
1.
Before starting any installation procedures, attach the poron foam to the Panel PC.
Poron foam
2.
Select a place on the panel (or wall) where you will mount the Panel PC.
3.
Cut out a shape on the panel that corresponds to the Panel PC's rear dimensions (210.5mm
x 132.2mm) and ensure that the Panel PC can be fitted into the panel properly.
5
Mounting hole
Panel
210.50
www.dfi.com