Installing An M.2 Card - DFI KS070-AL User Manual

Installing an M.2 Card

The system is equipped with one M.2 socket, supporting the M.2 22x42mm (key B) form factor.
Use the following procedure to install an M.2 card:
1. Align the notch at the edge of the M.2 card with the key in the connector.
2. Insert the M.2 card into the connector.
3. Push down on the other end of the M.2 card and secure and card on the mainboard with the
provided mounting screw.
Chapter 3 Installing Devices
Chapter 3
M.2 card
Mounting screw
13
Note:
The M.2 socket supports PCIe, USB, and SATA signals and can accommodate common
mobile broadband and storage modules. For jumper settings on switching the signal
betwen SATA and PCIe, refer to Chapter 4.
www.dfi.com