Download  Print this page

Wireless Probe Operation - Siemens ACUSON Freestyle User Manual

Diagnostic ultrasound system.
Hide thumbs

Advertisement

Scanning

Wireless Probe Operation

To operate the system probe in wireless mode, insert a charged probe battery pack into the
probe.
NOTE: The battery pack is keyed to prevent improper connection. Do not use force
when inserting the probe battery pack.
Probe and battery; line up battery connectors with probe connectors
With the system power ON, turn the probe on by continuously pressing the two circular on-
probe buttons. When power has been turned on for the probe, you will hear a beep from the
probe. The system and the probe will automatically connect.
Connecting More Than One Wireless Probe
To use more than one probe in wireless mode during an exam:
1.
Turn the first probe off by continuously pressing the two circular on-probe buttons, thereby
disconnecting it from the console.
2.
Connect to the second probe.
NOTE: If a Probe is connected to the console with the probe Cable Adapter, you
will need to disconnect it to make a wireless connection to another probe. You can
disconnect it either at the probe or the console end.
5-6
Freestyle User Manual
ACUSON

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: