Table of Contents
Advertisement
Safety and Care
IPX8 Immersion Levels
CAUTION: To avoid damage to the probe, observe the continuous immersion levels
indicated for each probe type. When disinfecting probes, be careful to continuously
immerse only the top portion of the probe, up to two inches (5 cm) from the transducer
face in the disinfecting solution. The entire probe, battery pack, or probe battery will may
be immersed for short periods of time (under three minutes). Do not continuously immerse
the entire probe, battery pack, or probe battery well.
Example of continuous immersion level for each probe type
1.
L8-3 probe (left)
2.
L13-5 probe (middle)
3.
C5-2 probe (right)
2-36
Freestyle User Manual
ACUSON
Advertisement
Table of Contents
