Download  Print this page

Configuring A Dicom Storage Server - Siemens ACUSON Freestyle User Manual

Diagnostic ultrasound system.
Hide thumbs

Advertisement

Configuring a DICOM Storage Server

To configure a DICOM storage server,
1.
Go to
/
SETUP
SETTINGS
2.
Select New.
3.
Enter the DICOM storage server information as described in the following table.
DICOM Storage Server Fields
DICOM Storage Server
Field
Alias
IP Address
AE Title
Port Number
Test
Freestyle User Manual
ACUSON
/
/
.
DICOM
PACS
Description
A name you create to identify the DICOM server.
Limited to 16 characters.
The IP (Internet Protocol) address for the server. See your System
Administrator to determine your IP Address.
Identifies the server application that receives the images from the
Freestyle. The alphanumeric characters entered in this
ACUSON
field must exactly match (including case) the Application Entity name
assigned to the server application.
Limited to 16 characters; cannot include the period (".") character.
The remote port on the server that is to receive the connection
request and the patient studies.
The default setting is 104.
Used to test the connection once you have entered the configuration
data. You can test using either Ping or C-Echo (DICOM Verify). Ping
tests the connection across the network; C-Echo additionally tests
that the DICOM server is active.
For security reasons, some network and network servers are set up
not to respond to Ping or C-Echo commands. Check with your IT
department or PACS Administrator to determine how your network
handles these functions.
Connectivity
8-7

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: