Table of Contents
Advertisement
Safety and Care
Caring for Probe Accessories
Instructions are provided for the accessories.
Probe Sheaths
WARNING: There have been reports of severe allergic reactions to medical devices
containing latex (natural rubber). Health care professionals are advised to identify latex
sensitive patients and to be prepared to treat allergic reactions promptly. For additional
information in the U.S.A., refer to FDA Medical Alert MDA91 1. In the United States of
America, for a single copy of a reference list on latex sensitivity write to LATEX, FDA,
HFZ-220, Rockville, MD 20857.
WARNING: To minimize the risk of cross contamination and infectious diseases, a sterile,
non pyrogenic probe sheath must be in place during procedures requiring sterility.
WARNING: Only a sterile probe sheath provides the sterile barrier required for surgical
procedures. To ensure sterility of a procedure, always place a sterile sheath on a probe,
as probes cannot be sterilized using hot steam, cold gas, or Ethylene Oxide (EO)
methods.
CAUTION: Siemens recommends that you follow all instructions provided by
manufacturers of sterile goods (probe sheaths) to ensure proper handling, storage, and
cycling of all sterile goods.
Using a disposable probe sheath on a probe reduces the possibility of cross contamination.
Always use a protective probe sheath when scanning an open wound or an area where the
skin is not intact.
Storage
WARNING: Before use, examine sterile goods, such as sheaths, for any material flaws.
Some packaging may list an expiration date. Any product showing flaws, or whose
expiration date has passed, should not be used.
CAUTION: Do not store probe sheaths in direct sunlight, as ultraviolet damage can
result.
Latex products have a limited shelf life, and should be stored in a cool, dry, dark place with an
ambient temperature between -5°C and +40°C and up to 80% relative humidity at +40°C.
2-38
Freestyle User Manual
ACUSON
Advertisement
Table of Contents
