Ethercat Link - ABB FECA-01 User Manual

102 Technical data
Mounting
Degree of protection
Ambient conditions
Indicators
Connectors
Power supply
General

EtherCAT link

Compatible devices
Medium
Topology
Transfer rate
Serial communication
type
Protocol
1)
Shielded cable strongly recommended
Into the option slot on the drive
IP20
The applicable ambient conditions specified for the
drive in its manuals are in effect.
Two green LEDs and one bicolor LED: LINK/ACT,
LINK/ACT and STATUS
20-pin connector to the drive (X3)
Two 8P8C modular jacks (X1 and X2)
+3.3 V +5% max. 450 mA (supplied by the drive)
Complies with EMC standard EN 61800-3:2004
Printed circuit board conformal coated
All EtherCAT-compliant devices
100BASE-TX
• Termination: Internal
• Wiring: Cat 5e FTP
• Connector: 8P8C modular jack (RJ-45)
• Maximum segment length: 100 m
Daisy chain
100 Mbit/s
Full duplex
EtherCAT
1) 1)
or STP (UTP)