T He Tw-S Co Ntro L - Conair Thermolator TW-S User Manual

Setpoint Value Display
The window displays the
fluid temperature setpoint
during normal operation.
Process Value Display
The window displays the
actual temperature of fluid
entering the "To Process"
line.
Run
Press to begin normal
operation.
Audible Alarm
(Optional)
Start Button
Press and hold to begin normal operation. The
button lights when the unit is running after vent
cycle has completed.

Note: You must hold the button during entire unit cycle.
4-2 I O p e r a t i o n

T he TW-S Co ntro l

Stop Pump Button
Press to stop the Thermolator.
Push again to de-assert and
allow restart.
Raise and Lower Key
Used to enter the setpoint temperature, index through the
operating modes or change other parameter values.
to
Press increase a value.
Press to decrease a value.
2
TIP: Press and hold the key for faster scrolling speed.
Select Key
Used to edit a parameter or
save a changed parameter.
Status Lights
The lights indicate the
operating status of the listed
components.
= Off or inactive
= On or active
(1): More Cool
(2): Less Cool
(5): Heat