Tw-P Features And Options; Options - Conair Thermolator TW-S User Manual

2-10 I D e sc r i p ti o n
T W-S a nd TW-P Fe a tures a nd O ptio ns
Optio ns
Modulating Valve
This option eliminates thermal shock from your process circuit by modu-
lating the cooling water. If Modulating valve option is not chosen, the
Solenoid valve replaces it.
Compressed Air Mold Purge (Available with TW-P only)
This option quickly evacuates fluid from the process circuit, allowing for faster, cleaner
disconnection of the temperature controller from molds and hoses.
Alarm packages
The Thermolator control includes an output relay that can be connected to an optional
external alarm package to call attention to alarm conditions
Stacking Rack
Save floor space by stacking Thermolators two-high. The stacking rack can be used only
with single-zone models with a height of less than 30 inches{262 mm} high cabinets.
Incoloy heaters
minimize chemical and high temperature
damage, and maximizes life.
Two-piece cast
construction
High efficiency pumps
from 3/4 to 10 Hp. Silicon
carbide seals are standard.
Built-in sediment trap
settles contaminants away
from the pump seals.
Solenoid Valve
.