Flo Wmeter Installa Tion Instructions - Conair Thermolator TW-S User Manual

Flowmeter installation instruction sheet
Flowmeter Installation Instruction Sheet
1. Remove the plumbing connection from the unit to the process.
PRH 021- 0 9 1 5
2. Add sealant to threads and attach flow meter and fittings to the unit according to the figure
1
Remove the plumbing connection from the unit to the process.
below. The flow direction is indicated on the valve body. Make sure the meter is installed with
the correct orientation.
2
Add sealant to threads and attach flow meter and fittings to the unit according
to the figure below. The flow direction is indicated on the valve body. Make sure the
meter is installed with the correct orientation.
3
Reinstall all plumbing that was removed during installation.
4
Turn water on and check for leaks. Repair as required.
3. Reinstall all plumbing that was removed during installation.
5
If the flowmeter has auxiliary contacts, reduce the process flow below the
4. Turn water on and check for leaks. Repair as required.
designated alarm threshold to test if they were set up properly.
5. If the flowmeter has auxiliary contacts, reduce the process flow below the designated alarm
threshold to test if they were set up properly.
PRH021-0915
A ppendi x I H-1