Typical Applications; Ty Pic Al A Pp L Ic A T Io N S; Wha T I S The T He Rmo La To R T W-S A Nd T W- P - Conair Thermolator TW-S User Manual

Contact Conair Customer Service
1 800 458 1960.
From outside of the United States,
call: 814 437 6861
2-2 I D e sc r i p t i o n

Wha t i s the T he rmo la to r T W-S a nd T W- P

The Thermolator TW-S and TW-P Series circulates water at a temperature higher than the
available water supply, to add or remove heat as needed to maintain a uniform temperature
setpoint in the process.
The TW-S and TW-P Series is available in single or multiple-zone configurations for
process heating and cooling. Two-zone models can control up to two temperatures at dif-
ferent locations in the process. Two-zone models have common cooling water manifolds
and electrical connections.
Typical Ap pli ca ti ons
The best model for your application depends on the process temperature you need to
maintain and the quality of the cooling water supply.
TW direct injection (DI) models control the temperature by discharging heated process
water and adding cooling water directly from the water supply. DI models are designed
for:
• Process temperatures up to 250°F {121° C} - with options up to 300° F {149° C}.
• Use with chiller water or properly treated and filtered tower or city water.
Direct injection models may be used with glycol/water process loop mixtures, as long
as the glycol does not exceed 50% of the mixture. If your application requires a higher
percentage of glycol, or if you have a contaminated cooling water supply, ask your Conair
representative about our closed-circuit or isolated circuit Thermolator TW-S and TW-P
models.
IMPORTANT: Do not use deionized water or glycol mixtures containing additives
in the Thermolator. Softened water or glycol mixtures with additives, such as au-
tomotive fluids, can damage the Thermolator. Glycol/water process loop mixtures
should use only industrial-grade ethylene or propylene glycol.
Contact Conair for more information about recommendations for your product.