Temperature Units; Te Mp Er A T U R E Un It S - Conair Thermolator TW-S User Manual

Te mpe ra tu r e Un i t s
To select the desired temperature units for your system (°F vs. °C), follow this procedure:
1
Stop the Thermolator or ensure that you are on the home screen by pressing the
STOP button.
2
Enter the user configuration menu by holding the "Function"
seconds.
If the passcode is at its default "0", simply push "Select"
If the passcode has been changed to something else, use the "Up"
"Down" buttons to scroll to the correct passcode, and then push "Select"
3
Repeatedly push "Select" to scroll through available user parameters until Unt
(Units) is displayed in the upper display (about 2 presses).
In the lower display, use the "Up"
Fahrenheit or  for Celsius.
4
Push "Select" to save the changed parameter. Push "STOP"
Function
.
or "Down" buttons to select F for a
button for 5
and
.
to exit.
I n stal l a t i on I 3-11