Printronix SL5000r User Manual page 54

Chapter 2
5. Press + or – to scroll through the choices: Minimum or Maximum. The default is
6. Press
7. Press  and
8. Press PAUSE again to put the printer online.
Setting Overstrike Style
This option is used for marking bad labels with different overstrike styles: Grid (the
default), Grey, Checkerboard, or Error Type Msg.
IMPORTANT If you are using an RFID encoder, set the validator Overstrike Style different than
the RFID Overstrike Style (in the RFID CONTROL menu). This will help you
differentiate between a validator error and an RFID error.
1. Press
2. If necessary, press and
3. Press
4. Press  until Overstrike Style displays.
5. Press + or – to scroll through the choices: Grid, Grey, Checkerboard, or Error Type
6. Press
7. Press  and
8. Press PAUSE again to put the printer online.
Setting I2of5 Checksum
This option allows you to include or exclude the checksum option in the Interleaved 2 of
5 code as part of the grading. For example, if you enable this option, then any incoming
bar code data without checksum digits will be graded as a failure, and a Checksum
Failure error will display. The default is Disable.
1. Press
2. If necessary, press and
3. Press
4. Press  until I2of5 Checksum displays.
5. Press + or – to scroll through the options: Enable or Disable. The default is Disable.
6. Press
7. Press  and
8. Press PAUSE again to put the printer online.
54
Minimum.

to select the desired value.

at the same time to lock the
printer offline.
. .
. to take the printer offline and place the printer in Menu mode.
. .
. until VALIDATOR displays.
Msg. The default is Grid.

to select the desired value.

at the same time to lock the
printer offline.
. .
. to take the printer offline and place the printer in Menu mode.
. .
. until VALIDATOR displays.

to accept the desired value.

at the same time to lock the
printer offline.

key, then press PAUSE to take the

at the same time to unlock the

key, then press PAUSE to take the

at the same time to unlock the

key, then press PAUSE to take the

key.

key.