Printronix SL5000r User Manual page 50

Chapter 2
1. Press
2. If necessary, press and
3. Press
4. Press until Auto Report Time displays.
5. Press + or – to scroll through the choices: 1 to 10 seconds. The default is 1 second.
6. When the desired number of seconds displays, press
7. Press  and
8. Press PAUSE again to put the printer online.
Resetting Validator Data
The validator reports on all bar codes it detects since the last data reset. For example,
you print a large batch of labels with bar codes and then print a validator report. Then
you print another batch of labels with bar codes and print another report. The report will
contain information on both batch jobs. However, if you reset the validator data between
batch jobs, the second report will only contain information on the second batch job.
To reset Validator Data:
1. Press
2. If necessary, press and
3. Press
4. Press until Clear Data displays.
5. Press
6. Press  and
7. Press PAUSE again to put the printer online.
Defining the Data Output Destination (Telemetry Path)
You may want to send a streaming flow of validation data to an external device during
the print job. The default is Disabled. Follow the procedure below to select the data
output destination.
1. Press
2. If necessary, press and
3. Press
4. Press until Telemetry Path displays.
5. Press + or – to cycle through the choices:
•
50
. .
. to take the printer offline and place the printer in Menu mode.
. .
. until VALIDATOR displays.
Time.

at the same time to lock the
printer offline.
. .
. to take the printer offline and place the printer in Menu mode.
. .
. until VALIDATOR displays.

to clear validator data.

at the same time to lock the
printer offline.
. .
. to take the printer offline and place the printer in Menu mode.
. .
. until VALIDATOR displays.
Disabled. Default setting. The validator does not send any data to an external
device.

at the same time to unlock the

key, then press PAUSE to take the

at the same time to unlock the

key, then press PAUSE to take the

at the same time to unlock the

key.

to set the Auto Report

key.

key.