REVISIONS
Manual Number
Print Date
Jul. 2012
IB(NA)-0600478ENG-A
Aug. 2016
IB(NA)-0600478ENG-B
Jun. 2018
IB(NA)-0600478ENG-C
For Maximum Safety
• Mitsubishi Electric drive units are not designed or manufactured to be used in equipment or systems in
situations that can affect or endanger human life.
• When considering this product for operation in special applications such as machinery or systems used in
passenger transportation, medical, aerospace, atomic power, electric power, or submarine repeating
applications, please contact your nearest Mitsubishi Electric sales representative.
• Although this product was manufactured under conditions of strict quality control, you are strongly advised to
install safety devices to prevent serious accidents when it is used in facilities where breakdowns of the product
are likely to cause a serious accident.
• Please do not use this product for loads other than three-phase induction motors.
298
IB(NA)-0600478ENG-C
*The manual number is given on the bottom left of the back cover.
First edition
Addition
FR-D740-0.4K to 3.7K-G
Pr. 281 Brake operation time at start
Pr. 283 Brake operation time at stop
Pr. 643 Voltage compensation amount setting
Pr. 658 Wiring resistance
Setting values "10, 11" of Pr. 167 Output current detection operation selection
Setting values "20, 37, 120, 137" of Pr. 190 and Pr. 192
Addition
Compatibility with IPM motors and SPM motors other than the Mitsubishi
Electric GV series S-PM geared motors.
Pr.71, Pr.80, Pr.81, Pr.83, Pr.84, Pr.90, Pr.92, Pr.93, Pr.96, Pr.600 to Pr.604, Pr.672,
Pr.702, Pr.706, Pr.707, Pr.711, Pr.712, Pr.717, Pr.721, Pr.724 to Pr.726, Pr.824,
Pr.825, Pr.859, Pr.998
Revision