Section 6 Measurement Menu; Instrument Configuration; Continuous Mode Description - Hach ORBISPHERE G1100 User Manual

Section 6

6.1 Instrument configuration

6.1.1 Continuous mode description

The continuous mode is typically used for process measurement, and follows this cycle:
By default every 5 sec. measurements are refreshed on the display
•
Regularly updates the outputs (relay and analog outputs)
•
Continuously stores measurements in memory (volatile and non volatile memory).
•
Measurement Menu
Figure 32 Measurement menu
Measurement mode is locked on Continuous for on line
•
process.
Selection of units for barometric pressure and temperature
•
49