Communication Menu
9.2 PROFIBUS-DP communication (optional)
9.2.1 Installation
On the ORBISPHERE CD, there is an "Orbi2079.gsd" and an "Orbi2079.bmp" file available in
the "Profibus DP" folder to help configure the PROFIBUS-DP. The GSD file contains the
following elements:
A module to decode the barometric pressure value and unit
•
A module to convert the channel measurement data such as gas concentration, gas unit,
•
temperature, temperature unit and the events.
Personal Injury Hazard. Only qualified personnel should conduct the tasks described in this
section of the manual.
1. Install the PROFIBUS-DP module and the jumper J3 on the main board (location highlighted
in the illustration below).
78
Potential Electrocution Hazard. Always disconnect power to the instrument when
making electrical connections.
Potential Instrument Damage. Proper ESD (electrostatic discharge) protocols must
be followed to prevent damage to the product. All fittings must be properly seated
and tightened to prevent any water and dust ingress.
WARNING
CAUTION
NOTICE